Straight Ahead Inspection
- After completing all the necessary procedures on the steering gear, inspect the position of the front wheels and the steering wheel.
- With the vehicle on the floor, place the steering wheel in the straight-ahead position.
- Mark the centerline of the front tires on the floor.
- Turn the steering wheel all the way to the right.
- Mark the centerline of the front tires on the floor.
- Measure the turning angle of each front tire.
- Compare the measurements to the specifications.
Specifications:
- The outside angle (1) is 32.36 degrees.
- The inside angle (2) is 39.06 degrees.