April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Fig 1: View of Accelerator Pedal Position Sensor Harness Connector

GM899725

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Handling Electronic Throttle Control Notice in Cautions and Notices.

Remove the left instrument panel (IP) lower closeout insulator panel.
Disconnect the accelerator pedal position (APP) sensor harness connector.

Fig 2: Identifying APP Assembly
Courtesy of GENERAL MOTORS CORP.

Remove the accelerator pedal mounting bolts (1).
Remove the APP assembly (2).