LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Tracker 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.0L (Introduction) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the air cleaner lower assembly (2) to the vehicle.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Secure the air cleaner lower assembly with the 3 bolts (1).

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  4. Install the air cleaner cover.
  5. Fig 1: View Of Air Cleaner Lower Assembly & Bolts
    GM471181Courtesy of GENERAL MOTORS CORP.
  6. Secure the air cleaner cover with the retaining clips (2).
  7. Connect the EVAP system vent hose to the air cleaner cover.
  8. Connect the air inlet duct (1) to the air cleaner assembly.
  9. Fig 2: Air Cleaner Retainers
    GM471178Courtesy of GENERAL MOTORS CORP.