LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Tracker 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.0L (Introduction) >> Repair Instructions >> Ignition Coil(s) Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect the spark plug wire of the faulty ignition coil from the spark plug.
  2. Disconnect the electrical connector from the faulty ignition coil.
  3. Remove the two bolts (1) that secure the ignition coil 1 (2) or the ignition coil 2 (3) to the valve cover.
  4. Remove the ignition coil 1 (2) or the ignition coil 2 (3) from the valve cover.
    5. Fig 1: View Of Ignition Coils 1 & 2, & Bolts
    GM482356Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the 1 cylinder spark plug wire (3) from the ignition coil (1) or the 2 cylinder spark plug wire (2) from the ignition coil (1).
    6. Fig 2: View Of 1 & 2 Cylinder Spark Plug Wires & Ignition Coil
    GM441353Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals