LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Tracker RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.5L (LE8) (Introduction) >> Repair Instructions >> Powertrain Control Module (PCM) Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

IMPORTANT: The replacement PCM must be programmed.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 5 in SIR.
  3. Release the two plastic retainers (2) with the blade of a screwdriver and remove the PCM cover (1).
    4. Fig 1: View Of PCM Cover & Plastic Retainers
    GM674015Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the four PCM electrical connectors.
  5. Remove the two PCM retaining bolts (3).
  6. Slide the PCM (4) forward and out from the PCM bracket.
  7. Remove the four PCM bracket bolts (1).
  8. Remove the PCM bracket (2) from underneath the instrument panel.
    9. Fig 2: View Of PCM, Bracket & Bolts
    GM466479Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals