LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Disc Brake System) >> Repair Instructions >> Disc Brake Hardware Replacement - Rear >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean all parts in clean, denatured alcohol.
  2. Dry with low pressure, non-lubricated, filtered air.
  3. Inspect the brake caliper bracket for cracks. If cracked, replace bracket.
  4. Lubricate the brake caliper pin bolt sleeves with high temperature silicone lubricant.
  5. Install the brake caliper bracket. Refer to Brake Caliper Bracket Replacement - Rear .
  6. Install the brake pad retainers (1) to the bracket caliper bracket (3).
  7. Install the brake pads (2) to the bracket caliper bracket (3).
    8. Fig 1: View Of Brake Pads, Brake Pad Retainers, & Caliper Bracket
    GM727742Courtesy of GENERAL MOTORS CORP.
  8. Install the brake caliper to the brake caliper bracket. Refer to Brake Caliper Replacement - Rear .
scientia non olet · About LEMON Manuals