LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Venture LT, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.4L (Introduction) >> Repair Instructions >> Accelerator Controls Cable Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Accelerator Cable Connection
    GM12831Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the accelerator cable from the throttle body lever.
  2. Disconnect the accelerator cable from the accelerator cable bracket.
  3. Remove the left instrument panel sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gauges, and Console.
  4. Fig 2: View Of Accelerator Cable At Accelerator Pedal
    GM12826Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the accelerator cable from the accelerator pedal.
  6. Pull the accelerator cable through the bulkhead.
  7. Fig 3: View Of Accelerator Cable
    GM50638Courtesy of GENERAL MOTORS CORP.
  8. Remove the accelerator cable from the vehicle. Note the cable routing for aid in installation.