LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Venture LT, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.4L (Introduction) >> Repair Instructions >> Exhaust Gas Recirculation (EGR) Valve Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of EGR Valve
    GM507392Courtesy of GENERAL MOTORS CORP.
  1. Install the EGR valve with a new gasket to the intake manifold.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts through the EGR valve.

    Tighten:  Tighten the bolts to 30 N.m (22 lb ft).

  3. Connect the pipe assembly to the EGR valve.
  4. Install the bolt.

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

  5. Install the transaxle fluid filler tube. Refer toFiller Tube and Seal Replacement .
  6. Connect the EGR valve electrical connector.
scientia non olet · About LEMON Manuals