LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - (Introduction) Specifications & Repair Instructions >> Repair Instructions >> Engine Coolant Temperature (ECT) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

NOTE: Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.
NOTE: Refer to Component Fastener Tightening Notice in Cautions and Notices.
  1. Coat the threads with sealer GM P/N 9985253 or equivalent.
    2. Fig 1: View Of ECT Sensor
    GM246800Courtesy of GENERAL MOTORS CORP.
  2. Install the ECT sensor.

    Tighten:  Tighten the ECT sensor to 20 N.m (15 lb ft).

    3. Fig 2: Locating Engine Coolant Temperature (ECT) Sensor Electrical Connector
    GM246797Courtesy of GENERAL MOTORS CORP.
  3. Connect the ECT sensor harness connector to the ECT sensor.
  4. Refill the cooling system. Refer to Draining and Filling Cooling System in Engine Cooling.
  5. Install the engine cover. Refer to Engine Cover Replacement in Interior Trim.
scientia non olet · About LEMON Manuals