LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Avalanche 2500 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 8.1L - Introduction >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of MAF/IAT Sensor Electrical Connectors
    GM750582Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake air resonator. Refer to Intake Air Resonator Replacement .
  2. Disconnect the mass air flow/intake air temperature (MAF/IAT) sensor electrical connector (3).
    3. Fig 2: View Of Air Cleaner Assembly & Adapter
    GM334911Courtesy of GENERAL MOTORS CORP.
  3. Pull up on the air cleaner assembly (1) in order to release the retainers from the air cleaner adapter (2).
    4. Fig 3: View Of Air Cleaner Assembly, MAF/IAT Sensor & Clamp
    GM858230Courtesy of GENERAL MOTORS CORP.
  4. If necessary, loosen the MAF/IAT sensor clamp.
  5. Remove the MAF/IAT sensor.
scientia non olet · About LEMON Manuals