LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Avalanche 2500 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 8.1L - Introduction >> Repair Instructions >> Knock Sensor (KS) 2 Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Knock Sensor (KS) 2
    GM858222Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the knock sensor.

    Tighten:  Tighten the sensor to 20 N.m (15 lb ft).

    2. Fig 2: View Of Knock Sensor (KS) 2 Electrical Connector
    GM1236370Courtesy of GENERAL MOTORS CORP.
  2. Connect the knock sensor electrical connector (3).
  3. Fill the cooling system/engine block. Refer to Draining and Filling Cooling System in Engine Cooling.
scientia non olet · About LEMON Manuals