Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of A/T Shift Lock Control & Pivot Points

Courtesy of GENERAL MOTORS CORP.

Install the upper clip of the AT shift lock control onto the upper pivot point, and the lower clip onto the lower pivot point.
Install the center console. Refer to Console Replacement - Front Floor (Pontiac) or Console Replacement - Front Floor (Oldsmobile) in Instrument Panel, Gages, and Console.
Connect the electrical connector to the AT shift lock control.
Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.