LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Cobalt SS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.0L - (Introduction) >> Repair Instructions >> Powertrain Control Module (PCM) Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Use the retaining tab to secure the PCM, when installing the PCM to the underhood junction block bracket.
    2. Fig 1: View Of PCM
    GM1381712Courtesy of GENERAL MOTORS CORP.
  2. Connect the PCM harness connectors to the PCM.
  3. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
  4. Program the PCM. Refer to Control Module References in Computer/Integrating Systems.
scientia non olet · About LEMON Manuals