LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Corvette 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) >> Repair Instructions >> Fuel Hose/Pipes Replacement - Engine Compartment >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Left Fuel Rail Cover
    GM43560Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
    NOTE:
    • Do not repair the fuel feed or return pipes.
    • Replace the fuel feed and return pipes with original equipment or with parts that meet the GM specifications for those parts. The replacement pipe must have the same type of fittings as the original pipe in order to ensure the integrity of the connection.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure (7.0L) in Engine Electrical.
  2. Remove the left fuel rail cover.
  3. Relieve the fuel system pressure. Refer to the Fuel Pressure Relief Procedure .
    4. Fig 2: Chassis Fuel Pipe, Fuel Feed Hose & Fuel Rail
    GM329571Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the quick-connect fitting at the fuel rail (1). Refer to Quick Connect Fitting(s) Service (Metal Collar) .
  5. Disconnect the quick-connect fitting at the chassis fuel pipe (3). Refer to Quick Connect Fitting(s) Service (Metal Collar) .
  6. Remove the fuel feed hose (2).
  7. Cap the chassis fuel pipe and the fuel rail pipe in order to prevent possible fuel system contamination.
  8. Inspect the hose for bends, for kinks, for chafing, and for cracks. Replace the hose as required.
scientia non olet · About LEMON Manuals