LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 6.0L - Introduction >> Repair Instructions >> Accelerator Pedal Position (APP) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of APP Sensor Electrical Connector
    GM899725Courtesy of GENERAL MOTORS CORP.
  1. Remove the left knee bolster panel. Refer to Knee Bolster Replacement - Left in Instrument Panel, Gages, and Console.
  2. Disconnect the accelerator pedal position (APP) sensor electrical connector.
    3. Fig 2: View Of Accelerator Pedal Position Sensor
    GM742494Courtesy of GENERAL MOTORS CORP.
  3. Remove the accelerator pedal mounting bolts (1).
  4. Remove the APP assembly (2).
scientia non olet · About LEMON Manuals