LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 6.0L - Introduction >> Repair Instructions >> Fuel Sender Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Fuel Sender Assembly
    GM386369Courtesy of GENERAL MOTORS CORP.
  1. Install the new seal on the fuel tank.
  2. Install the fuel sender assembly.
  3. Install the retaining ring for the fuel sender assembly.
  4. Using the J 44402  , lock the retaining ring in place. See Special Tools .
  5. Install the fuel lines to the fuel sender. Refer to Fuel Hose/Pipes Assembly Replacement .
  6. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals