LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 6.0L - Introduction >> Repair Instructions >> Fuel Sender Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Fuel Sender Assembly
    GM386369Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Remove all dirt and debris from the area around the fuel sender assembly and the fuel tank.
  3. Remove the fuel lines from the sender assembly. Refer to Fuel Hose/Pipes Assembly Replacement .
  4. Using the J 44402  , remove the retaining ring for the fuel sender assembly. See Special Tools .
    5. CAUTION: Drain the fuel from the fuel sender assembly into an approved container in order to reduce the risk of fire and personal injury. Never store the fuel in an open container.
  5. Remove the fuel sender assembly and seal.
  6. Remove the seal from the fuel tank. Discard the seal.
scientia non olet · About LEMON Manuals