LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Controls - Introduction) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Fuel Tank Pressure Sensor
    GM892357Courtesy of GENERAL MOTORS CORP.
  1. The fuel tank pressure (FTP) sensor is located on top of the fuel pump module cover.
  2. Remove the fuel tank from the vehicle. Refer to Fuel Tank Replacement .
  3. Disengage the electrical connector from the FTP sensor.
  4. Remove the retaining nut and washer.
  5. Disengage the sensor from the fuel pump module cover.