LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Controls - Introduction) >> Repair Instructions >> Ignition Control Module Replacement - Bank 2 >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Ignition Module
    GM894329Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition module.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the ignition module bolts.

    Tighten:  Tighten the ignition module bolts to 8 N.m (71 lb in).