LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the drive belt. Refer to Drive Belt Replacement - Accessory in Engine Mechanical - 6.0L.
  2. Remove the electronic control module (ECM) from the bracket and move to the side. Refer to Engine Control Module (ECM) Replacement in Engine Controls - 6.0L.
    3. Fig 1: View Of Power Steering Pressure Hose, Return Hose & Pump
    GM841009Courtesy of GENERAL MOTORS CORP.
  3. Remove the power steering pressure hose (1) from power steering pump (2).
  4. Remove the power steering pump return hose (3) from power steering pump (2).
    5. Fig 2: Removing/Installing Power Steering Pump
    GM841012Courtesy of GENERAL MOTORS CORP.
  5. Remove the power steering pump mounting bolts (3).
  6. Remove the power steering pump (1).
  7. Remove the power steering pump pulley. Refer to Power Steering Pulley Replacement (5.3L) .
  8. If applicable, remove the power steering pump reservoir. Refer to Power Steering Reservoir Replacement - Off Vehicle (CB Series) .
scientia non olet · About LEMON Manuals