LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 6.0L - Introduction >> Repair Instructions >> Engine Control Module (ECM) Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the electrical connections to the ECM.

    Tighten:  Tighten bolts to 10 N.m (89 lb in).

  2. Install the ECM to the bracket.
  3. Position the ECM water boot back into place.
  4. Close the hood.
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
  6. Program the ECM. Refer to Control Module References in Computing/Integrating Systems.
scientia non olet · About LEMON Manuals