Fuel System Cleaning
- Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
- Inspect the fuel strainer. Replace the contaminated strainer and inspect the fuel pump.
- Inspect the fuel pump inlet for dirt and debris. Replace the fuel pump if you find dirt or debris in the fuel pump inlet.
- Flush the fuel tank with hot water.
- Pour the water out of the fuel sender assembly opening. Rock the tank to be sure that the removal of the water from the tank is complete
- Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
IMPORTANT:
When flushing the fuel tank, handle the fuel and water mixture as a hazardous material. Handle the fuel and water mixture in accordance with all applicable local, state, and federal laws and regulations.