LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 6.0L - Introduction >> Repair Instructions >> Heated Oxygen Sensor (HO2S) Replacement Bank 1 Sensor 1 >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Fig 1: Identifying O2 Sensor & Related Components
    GM715477Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Heated Oxygen and Oxygen Sensor Notice in Cautions and Notices.
  3. Disconnect the connector (1) for the heated oxygen sensor (HO2S).
  4. NOTE: Refer to Excessive Force and Oxygen Sensor Notice in Cautions and Notices.
  5. Using the J 39194-B  , remove the HO2S (2). See Special Tools .