LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Uplander LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Computer/Integrating Systems) >> Repair Instructions >> Data Link Connector Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Data Link Connector Retaining Bolts/Screws
    GM386625Courtesy of GENERAL MOTORS CORP.
  1. Place the data link connector into position.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the bolts/screws to the data link connector.

    Tighten:  Tighten the bolts/screws to 2 N.m (18 lb in).