LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Venture LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.4L - Introduction >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the fastener from the coolant tank.
  2. Remove the coolant tank and set aside.
  3. Remove the 3 bolts from the support brace and remove the brace.
  4. Disconnect the mass air flow (MAF) sensor electrical connector.
  5. Loosen the 2 clamps on the AIR intake duct/MAF sensor assembly.
  6. Remove the air inlet duct/MAF sensor assembly (1).
    7. Fig 1: Locating Air Cleaner Assembly Components
    GM512027Courtesy of GENERAL MOTORS CORP.
  7. Unsnap the 2 latches and remove the air cleaner housing cover (2).
  8. Remove the air filter element (3).
  9. Unsnap the latch on the upper cover and remove the cover.
    10. Fig 2: View Of PCM
    GM512028Courtesy of GENERAL MOTORS CORP.
  10. Carefully remove the powertrain control module (PCM) leaving the 2 harnesses connected and set aside.
    11. Fig 3: Locating Bolts For Air Cleaner Assembly
    GM512030Courtesy of GENERAL MOTORS CORP.
  11. Remove the 2 bolts (2) from the air cleaner assembly and remove the housing.
scientia non olet · About LEMON Manuals