Conditions For Running the DTC
- DTCs P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0117, P0118, P0121, P0122, P0123, P0125, P0171, P0172, P0201, P0202, P0203, P0204, P0205, P0206, P0300, P0401, P0403, P0404, P0405, P406, P502 are not set.
- The Engine Run Time parameter is more than 2 minutes.
- The ECT Sensor parameter is more than 70°C (158°F).
- The IAT Sensor parameter is more than -18°C (-0.4°F).
- The BARO parameter is more than 74 kPa.
- The Ignition 1 Signal parameter is between 9-18 volts.
- The TP Sensor parameter is less than 1.5 percent.
- The Vehicle Speed Sensor parameter is less than 5 km/h (3 mph).
- The transaxle state has not been changed in the last 0.1 second.
- The spark parameter is not more than 80 degrees or less than -80 degrees for longer than 409 seconds.
- The above conditions are met for more than 2 seconds.