LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Venture LT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.4L - Introduction >> Repair Instructions >> Idle Air Control (IAC) Valve Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the canister purge valve. Refer to Evaporative Emission (EVAP) Canister Purge Solenoid Valve Replacement .
  2. Fig 1: View Of IAC Valve Electrical Connector
    GM69056Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the idle air control (IAC) electrical connector.
  4. Fig 2: Installing IAC Valve Screws
    GM185614Courtesy of GENERAL MOTORS CORP.
  5. Remove the idle air control valve attaching screws.
  6. Fig 3: View Of IAC Valve
    GM185583Courtesy of GENERAL MOTORS CORP.
  7. Remove the idle air control valve.
  8. Fig 4: Installing IAC Valve O-Ring
    GM185626Courtesy of GENERAL MOTORS CORP.
  9. Remove the idle air control valve O-ring.