ECM Replacement
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
If the engine control module (ECM) is replaced, the following procedures must be performed:
- ECM Reprogramming. Refer to Service Programming System (SPS) .
- The CKP System Variation Learn. Refer to CKP SYSTEM VARIATION LEARN PROCEDURE - 3.9L or CKP SYSTEM VARIATION LEARN PROCEDURE - 3.5L .
- Engine Oil Life Remaining--When available, use a scan tool to reset the Engine Oil Life Remaining back to the original percentage recorded before the module was replaced.
- Transmission Fluid Life Remaining--When available, use the scan tool to reset the Transmission Fluid Life Remaining back to the original percentage recorded before the module was replaced.
- Theft Deterrent. Refer to PROGRAMMING THEFT DETERRENT SYSTEM COMPONENTS .