LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Brakes >> Antilock Brake System With Traction Control System & Stability Control System >> Repair Instructions >> Wheel Speed Sensor Replacement - Rear >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the hub and bearing assembly to the vehicle. Refer to Wheel Bearing/Hub Replacement - Rear (Independent Rear Suspension) or Wheel Bearing/Hub Replacement - Rear (Without Independent Rear Suspension) in Rear Suspension.
  2. Turn the ignition switch to the ON position, with the engine OFF.
  3. Perform the diagnostic system check. Refer to Diagnostic System Check - Vehicle in Vehicle DTC Information.
scientia non olet · About LEMON Manuals