Body Control Module Replacement

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Replacing Body Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the left closeout panel. Refer to Closeout/Insulator Panel Replacement - Left . Program the body control module after replacement. Refer to Control Module References .
1	Module Assembly, Body Control Module (BCM) Tip: Release the tabs on the BCM bracket and lift the module up and out.

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the left closeout panel. Refer to Closeout/Insulator Panel Replacement - Left .
Program the body control module after replacement. Refer to Control Module References .

Module Assembly, Body Control Module (BCM)
Tip: Release the tabs on the BCM bracket and lift the module up and out.