Circuit/System Testing
WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the voltage at the battery terminals and compare it with the Ignition 1 Signal parameter in the ECM data list. Verify that battery and ignition 1 signal readings do not differ more than 0.5 volt.
- If greater than 0.5 volt, test the ignition 1 ground circuits of the ECM for high resistance or replace the ECM.
- Go to Charging System Test .