Section 5 (Computer/Integrating Systems)
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Schematic and Routing Diagrams
- Component Locator
- Diagnostic Information and Procedures
- Diagnostic Starting Point - Computer/Integrating Systems
- Scan Tool Output Controls
- Scan Tool Data List
- Scan Tool Data Definitions
- DTC B1000
- DTC B1001
- DTC B1004
- DTC B1007
- DTC B1009
- DTC B1013
- DTC B1014
- DTC B1370
- DTC B1380
- DTC B1385
- DTC B1390
- DTC B1420
- DTC B1475
- DTC C0550
- DTC P2535
- DTC U0001
- DTC U0100 - U0299
- DTC U1000 and U1255
- DTC U1001-U1254
- DTC U1300, U1301, or U1305
- DTC U2100
- DTC U2105-U2199
- Symptoms - Computer/Integrating Systems
- Scan Tool Does Not Power Up
- Scan Tool Does Not Communicate with Class 2 Device
- Scan Tool Does Not Communicate with High Speed GMLAN Device
- Power Mode Mismatch
- Retained Accessory Power (RAP) On After Timeout
- Retained Accessory Power (RAP) Inoperative
- Control Module References
- Data Link References
- Repair Instructions
- Description and Operation