Engine Assembly: Remove, Install, and Overhaul
WARNING: This page is about the Cutaway 4.8 V, which is a different variant/trim than selected.
Includes: Replace Rings, Main and Rod Bearings, Camshaft(s), Crankshaft and Timing Components. Remove Cylinder ridge, burnish Cylinders, grind Valves and clean and test or replace Lifters.
Includes (where applicable): Adjust Valves. DOES NOT include Pin fit or rebore and align Rods. See machine operations.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| V8,Gas, w/Dual Alternators | Includes: Recover, Evacuate and Recharge Air Conditioning System. | 36.9 | A | |
| V8,Gas, w/o Dual Alternators | Includes: Recover, Evacuate and Recharge Air Conditioning System. | 36.4 | A | |
| Combination Procedure: VALVE GUIDE: Remove & Replace: | ||||
| Each | 0.2 | A | ||