Hinged Rear Window Replacement

HINGED REAR WINDOW REPLACEMENT

REMOVAL PROCEDURE
1. Remove the rear door trim panel.

2. CAUTION: Refer to Glass and Sheet Metal Handling Caution.

Use safety glasses and gloves.




3. Remove the screws (1) that retain the latch to the door.
4. Remove the screws that retain the hinge (3) to the door.
5. Remove the window assembly from the vehicle.

INSTALLATION PROCEDURE
1. Install the window assembly to the vehicle.

2. NOTE: Refer to Fastener Notice.

Install the screws that retain the hinge (3) to the door.

Tighten the screws to 3 N.m (27 lb in).




3. Install the screws (1) that retain the latch to the door.

Tighten the screws to 3 N.m (27 lb in).

4. Install the rear door trim panel.