Brake System Inspection and Test: Notes

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the brake system components listed. Repair or replace any parts that are leaking or damaged.

Component Inspections:

COMPONENT PROCEDURE CHART

Component	Procedure	Also check for
Master Cylinder	Look for damage or signs of fluid leakage at: Reservoir tank, subreservoir or master cylinder body. Lines, reservoir tank hose and grommets, and their joints. Between master cylinder and brake booster.	Bulging seal at reservoir tank cap. This is a sign of fluid contamination.
Brake Hoses	Look for damage or signs of fluid leakage at: Line joints and banjo bolt connections. Hoses and lines, also inspect for twisting or damage.	Bulging, twisted, or bent lines.
Caliper	Look for damage or signs of fluid leakage at: Piston seal. Banjo bolt connections. Bleed screw.	Seized or sticking caliper pins.
Wheel Cylinder	Look for damage or signs of fluid leakage at: Wheel cylinder. Line joints. Bleed screw.
ABS or VSA Modulator-control Unit	Look for damage or signs of fluid leakage at: Line joints. Modulator-control unit.