Circuit/System Testing
- Verify that the transmitter is the correct transmitter for the vehicle.
- If not the correct transmitter, replace the transmitter.
- Verify the scan tool FOB Programmed parameter is Yes.
- If not Yes, program the transmitter.
- Place the transmitter on the test pad of the J 43241
and press each button of the transmitter one at a time. The tester should sound a tone and illuminate a green light when each button is pressed.
- If one or more buttons does not sound the tone and illuminate the green light, replace the transmitter battery and retest with the J 43241
. If the condition continues after battery replacement, replace the transmitter.
- Attempt to program the transmitter, refer to Transmitter Programming . The transmitter should program.
- If the transmitter does not program, replace the RCDLR.