Body Control Module (BCM)
- Battery Voltage
-
Display indicates battery voltage. Measured in volts.
- Brake Applied Output Signal
-
Displays ON/OFF status of the brake pedal switch.
- Ignition 1 Signal
-
Display indicates ON when the ignition 1 input circuit of the module receives a battery signal from the ignition switch.
- Remote Start
-
Display indicates the current status of the remote start request.
- Shift Lock Solenoid Command:
-
Displays indicate OFF when the brake switch is depressed on Column Shift.
- Shifter Unlock Command
-
Displays indicates ON when the brake switch is depressed on Floor Shift.