LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Impala Police >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock System >> Repair Instructions >> Automatic Transmission Shift Lock Actuator Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (RPO LS4) or Battery Negative Cable Disconnection and Connection (RPOs LZE/LZ4/LZ9) .
    Fig 1: Automatic Transaxle Shift Lock Actuator Electrical Connector
    GM1218843Courtesy of GENERAL MOTORS CORP.
  2. Remove the center console. Refer to Front Floor Console Replacement (Impala) or Front Floor Console Replacement (Monte Carlo) .
    NOTE: To prevent component damage, DO NOT use metal tools to remove the trim.
    IMPORTANT: Use only a plastic trim tool to lift the shift lever bezel or trim plate. Do not use any tool between the shift lever bezel or trim plate and the shifter.
  3. Disconnect the automatic transaxle shift lock actuator electrical connector (1).
  4. Remove both ends of the automatic transaxle shift lock actuator from the pivot points.
scientia non olet · About LEMON Manuals