Installation Procedure
WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Position the headlamp flasher (1) to the front radiator support (2).NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the headlamp flasher bolts.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
- Connect the electrical connectors.
- Install the upper radiator baffle. Refer to Radiator Air Baffle and Deflector Replacement - Upper in Engine Cooling.