Installation Procedure

Install the strut to the vehicle. Refer to Strut Assembly Replacement .
Tighten: Tighten the strut-to-knuckle bolts as far as to allow movement of the knuckle.

Fig 1: Identifying Rear Camber Adjustment
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .
Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
Adjust the camber (1).
Tighten: Tighten the strut-to-knuckle bolts to 120 N.m (89 lb ft).
Lower the vehicle.