LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Optra LS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 1.8L (LDA) >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of MAP Sensor And Retaining Bolt
    GM1701074Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Disconnect the fuel rail. Refer to Fuel Rail Assembly Replacement .
  3. Disconnect the manifold absolute pressure (MAP) sensor connector from the MAP sensor.
  4. Remove the MAP sensor retaining bolt.
  5. Remove the MAP sensor from the intake manifold.
scientia non olet · About LEMON Manuals