LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2008 >> Optra5 LS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 1.6L >> Repair Instructions >> Intake Air Temperature Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Intake Air Temperature Sensor
    GM1289423Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the IAT sensor.

    Tighten:  Tighten the IAT sensor to 22 N.m (16 lb ft)  .

  2. Connect the IAT sensor connector.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals