Installation Procedure

Fig 1: Air Inlet Duct & MAF/IAT Sensor

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Tighten the air inlet duct clamp at the MAF/IAT sensor.
Tighten: Tighten the clamp to 3 N.m (27 lb in).

Fig 2: Air Inlet Duct & Throttle Body

Courtesy of GENERAL MOTORS CORP.

Install the air inlet duct to the throttle body.
Tighten the air inlet duct clamp at the throttle body.
Tighten: Tighten the clamp to 3 N.m (27 lb in).

Fig 3: View Of Positive Crankcase Ventilation (PCV) Clean Air Tube

Courtesy of GENERAL MOTORS CORP.

Connect the PCV tube to the air inlet duct. Refer to Plastic Collar Quick Connect Fitting Service .