Installation Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Shift Lock Control Solenoid

Courtesy of GENERAL MOTORS COMPANY

Route the shift lock control solenoid through the opening in the front of the control assembly.

Fig 2: Prying Solenoid Off Of Ball-Sockets On Solenoid Plunger And Solenoid Body

Courtesy of GENERAL MOTORS COMPANY

Attach the ball-sockets to the control assembly body and the shift-lock control lever.

Fig 3: Disconnecting Shift Lock Control Solenoid Connector From Solenoid

Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector to the Shift Lock Control Solenoid.
Install the automatic transaxle control assembly. Refer to Transmission Control Replacement , for the MH8 transmission or Transmission Control Replacement for the MH2 transmission.