Connecting Rod, Engine

CONNECTING ROD BOLT

First Pass 30 Nm (22 lb ft)
Second Pass - Counterclockwise Back Off to Zero
Third Pass 25 Nm (18 lb ft)
Final Pass 110 Degrees

CONNECTING ROD

Connecting Rod Bore Diameter - Bearing End 59.620-59.636 mm (2.3472-2.3479 in)

Connecting Rod Bore Diameter - Pin End 24.007-24.021 mm (0.9452-0.9457 in)

Connecting Rod Length - Center to Center 150.400 mm (5.9212 in)

Connecting Rod Side Clearance 0.095-0.355 mm (0.0374-0.0140 in)

Connecting Rod Width - Bearing End

Production 21.775 mm (0.8573 in)
Service 21.725-21.825 mm (0.8553-0.8593 in)

Connecting Rod Width - Pin End

Production 21.775 mm (0.8573 in)
Service 21.725-21.825 mm (0.8553-0.8593 in)