LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Traverse LS, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.6L - Introduction >> Repair Instructions >> Air Cleaner Element Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Air Cleaner Components
    GM1860603Courtesy of GENERAL MOTORS CORP.
  1. Install a NEW air cleaner element (4).
  2. Position the air cleaner housing cover (3) (with outlet duct) onto the air cleaner lower housing.
  3. Install the air cleaner outlet duct onto the throttle body.
  4. Tighten the 6 air cleaner housing cover screws (2) until snug.
    5. CAUTION: Refer to Fastener Caution .
  5. Tighten the air cleaner outlet duct clamp (1) at the throttle body.

    Tighten:  Tighten the clamp to 4 N.m (35 lb in).

    6. Fig 2: Identifying Fresh Air Tube & Related Components
    GM2065375Courtesy of GENERAL MOTORS CORP.
  6. Connect the engine wiring harness electrical connector to the MAF/IAT sensor.
  7. Connect the PCV quick disconnect (2). Refer to Plastic Collar Quick Connect Fitting Service .
  8. Connect the PCV fresh air tube to the camshaft cover fitting (1).
  9. Install the fuel injector sight shield. Refer to FUEL INJECTOR SIGHT SHIELD REPLACEMENT .
scientia non olet · About LEMON Manuals