Rear Camber Adjustment

Fig 1: Identifying Adjuster Cam Nut

Courtesy of GENERAL MOTORS CORP.

Loosen the adjuster cam nut (1).
Using a wrench to rotate the adjuster bolt (2), adjust the cam (3) to specifications.

NOTE: Ensure that the camber settings have not changed after torquing the adjuster nut to specifications. Readjust if necessary.

CAUTION: Refer to Fastener Caution .

Using a wrench to hold the adjuster bolt (2), tighten the adjuster nut (1).
Tighten: Tighten the nut to 140 N.m (103 lb ft).
Check the toe alignment and adjust if required. Refer to Rear Toe Adjustment .
Test drive the vehicle.