LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Traverse LS, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.6L - Introduction >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Engine Wiring Harness Electrical Connector
    GM1858010Courtesy of GENERAL MOTORS CORP.
  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) or Cooling System Draining and Filling (Vac N Fill) .
  2. Slide the electrical connector heat shield up the wiring harness.
  3. Disconnect the engine wiring harness electrical connector (8) from the engine coolant temperature (ECT) sensor (9).
    4. Fig 2: View Of ECT Sensor
    GM1836047Courtesy of GENERAL MOTORS CORP.
  4. Remove the ECT sensor.
scientia non olet · About LEMON Manuals