LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Traverse LS, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.6L - Introduction >> Repair Instructions >> Plastic Collar Quick Connect Fitting Service >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Lubricating Male Pipe End
    GM155425Courtesy of GENERAL MOTORS CORP.
    WARNING: Refer to Fuel Pipe Fitting Warning .
  1. Apply a few drops of clean engine oil to the male connection end.
  2. Fig 2: View Of Connecting Quick-Connect Fittings
    GM21855Courtesy of GENERAL MOTORS CORP.
  3. Push both sides of the quick-connect fitting together in order to cause the retaining feature to snap into place.
  4. Fig 3: Ensuring Secure Connection (Plastic Collar)
    GM155399Courtesy of GENERAL MOTORS CORP.
  5. Once installed, pull on both sides of the quick-connect fitting in order to make sure the connection is secure.