| 1 |
Power Steering Pump Pulley Procedure
- Use the J 25034-C:
remover for Buick, GMC, and Chevrolet or the SA9162C:
remover/installer for Saturn to remove the power steering pump pulley.
- Use the J 25033-C:
installer for Buick, GMC, and Chevrolet or the SA9162C:
remover/installer for Saturn to install the power steering pump pulley.
- Ensure the axial tolerance of the power steering pulley on the shaft is within 0.25 mm (0.010 in).
Special Tools
- J 25033-C:
Pulley Installer
- J 25034-C:
Pulley Remover
- SA9162C:
Power Steering Pump Pulley Remover/Installer
For equivalent regional tools, refer to Special Tools . |